circuit module
英 [ˈsɜːkɪt ˈmɒdjuːl]
美 [ˈsɜːrkɪt ˈmɑːdʒuːl]
网络 电路模块; 电路组件
双语例句
- Provided is an integrated circuit module used for non contact type IC card general offline type reader and writer.
一种用于非接触式IC卡通用脱机型读写器的集成电路模块。 - A plurality of ceramic substrates are used to manufacture and integrate a highly integrated multi-layer circuit module.
复数个陶瓷基板被用来制造和整合一高整合多层电路模组。 - A high-performance frequency-locking circuit module using a first-harmonic detection technique is designed and achieved.
运用一次微分探测技术，作者设计并实现了高性能的稳频电路模块。 - Thermal analysis for a board-level circuit module based on orthogonal test
基于正交试验的板级电路模块热分析 - The power-consumption of the fuze is estimated by the working current, voltage and working time of every circuit module of the fuze.
根据引信电路各模块的工作电流、电压及工作时间，估算整个系统的总功耗。 - Standard input and output contacts are formed on the bottom surface so that the circuit module can be used as a modularized device.
标准的输入和输出接点形成在底层表面使得电路模组能作为模组化元件。 - Design of Linearization and Amplification Circuit Module for High Power Laser Diode Temperature Detection
大功率LD温度检测线性化放大电路设计 - Circuit module design of high-voltage side for Optical current transformer
光电电流互感器高压侧电路模块的设计 - Study of an Engine Electronic Controller's Core Circuit Module Based on DSP and CAN
基于DSP和CAN总线的发动机电子控制器核心电路模块研究 - A new code acquisition circuit module is designed.
根据新方法设计了捕获电路模块。 - A image processing system based on high performance fixed-point Digital Signal Processor ( DSP) TMS320C6201 is discussed. This system includes drive circuit module, A/ D and D/ A transform module, digital signal processing module and video frequency display module.
介绍了一种基于高性能定点数字信号处理器（DSP）TMS320C6201的图像处理系统，该系统主要包括驱动电路模块、A/D和D/A转换模块、数字信号处理模块和视频显示模块。 - The hardware circuit is designed for the system, including the power module, clock circuit module and JTAG interface.
对整个系统的硬件电路进行了设计，包括相应的电源模块、时钟电路模块、电平转换模块和JTAG接口。 - A core is a verified circuit module, with the purpose of design reuse in a large system chip.
芯片核（Core）是已经完成了设计和验证的硅电路模块，可以用它在半导体芯片上构造更大更复杂的应用。 - In this paper we present design principle of hardware, discuss function of each circuit module, finally use high precision device to test this system and discuss the actual control result.
文中还给出了系统的硬件设计原理，给出了具体电路，讨论了各个电路模块实现的功能，最后利用高精度测试仪器对该系统进行了测试，对实际控制效果进行讨论。 - Fulfilled the designation of the various hardware circuits such as the power circuit module and the control circuit module.
分别完成功率电路模块和控制电路模块中的各类硬件电路的设计。 - Used hardware and software combination, the vehicle controller circuit module are tested and debugged.
采用软硬件结合的方法，对整车控制器的各个电路模块进行检测调试。 - First, the control circuit structure of the pressure control system was presented. Then, the key circuit module design technique in the pressure control system was analyzed.
首先介绍了气压控制系统中的总体控制电路结构；其次分析了气压控制系统中的关键电路模块设计技术；最后研究了气压控制系统的电路抗干扰措施。 - The hardware of this setup includes main circuit module, drive and isolation module and detection module.
硬件平台包括主回路模块、驱动隔离模块和检测模块等。 - In addition to the display and keyboard module circuit module circuit design, the basic hardware of the system to meet the design requirements.
此外还进行了显示模块电路和键盘模块电路的设计，整个系统的硬件电路基本满足设计要求。 - This device adopt the Plug-in model, through the motherboard integrated with each circuit module.
装置采用插件式结构设计，通过母板将各个电路模块集成在一起。 - The hardware circuits: main circuit module DSP control module, signal detection module, switching module, communication module, keyboard and display module of the system are designed, the principle of design and method of composition are illustrated.
设计了系统主电路模块、DSP主控制模块、信号检测模块、切换模块、通讯模块和键盘与显示模块等硬件电路，并详细阐述了系统各模块电路的组成原理和实现方法。 - Secondary circuit module main contains interface circuits which can be used to download programs and press call circuit.
辅助电路模块主要包含了可用于下载的程序接口电路及按键呼叫电路。 - In this I give detailed description of every circuit module which I designed, And given some technical parameters.
本文对各个电路的设计都给出了详细的描述说明，并给出了一定的技术参数。 - In the part of hardware design, first determine the chip type, and then design the microcontroller peripheral circuit module, USB and CAN hardware interface circuit module.
在硬件设计部分，首先从芯片选型开始，然后分模块设计了微处理器外围电路、USB和CAN硬件接口电路。 - And according to the system failure that may occur, the corresponding protection circuit module is designed.
并根据系统可能出现的故障，设计了相应的保护电路模块。 - Respectively is weak signal processing circuit module, DAQ module and PC applications module.
分别是微弱信号调理电路模块、数据采集模块和上位机应用程序模块。 - Then analyses and calculates the hardware circuit to each circuit module.
分别对各个硬件电路模块进行了详细的电路分析和说明。 - After the principles of the different circuit module are analyzed, the circuit structures are designed.
然后，分别对各模块电路的原理进行了深入分析，在此基础上，设计了各模块电路的结构。 - In the third chapter about hardware, hardware structure of each circuit module and wiring diagram are detailed.
第三章硬件电路部分是对该控制器硬件电路的结构，对各个模块的电路原理和接线图进行详细阐述。